炊具平面耐磨試驗機/炊具平面涂層耐磨測試儀/炊具耐磨測試機

1.依據BS 7069及CMA相關標準設計，主要應用于認證機構，炊具公司實驗室試驗產品使用。

2．使用220V電壓,50HZ,使用可調速電動馬達。

3．用于不沾鍋涂層耐磨損試驗。

4．使用方法將鍋用夾具鎖緊。鍋的底面應與電爐表面*接觸，裝上百潔布的工作組件與不沾鍋內涂層表面平行，并以自身重力下壓使其*接觸，并在鍋內放一定量的測試液（根據各標準而定）。

5．工作臺以一定的距離來回帶動鍋與百潔布摩擦（根據各標準而定），以達到試驗不沾鍋涂層耐磨程度目的。

6．測試周期0-9999次。

Surface abrasion tester/cooker planar coating abrasion tester/cooker wear tester

1. Based on BS 7069 and CMA related standard design, mainly applied to the certification body, the laboratory test product of the cooker company.

2. Use 220V voltage, 50HZ, with adjustable speed motor.

3. Used for non-wear test of non-stick coating.

4. Lock the pot with clamping method. Pot bottom should certainly contact surface of the furnace, and work with hundreds of microfiber cloth components with non-stick pan coating surface parallel to and by its own gravity press to make it fully contact, and in the pot to put a certain amount of test solution (according to the standard).

5. The table will drive the pan and the baijie friction (according to each standard) at a certain distance to achieve the purpose of testing the wear-resisting degree of non-stick coating.

6. Test cycle 0-9999 times.