瓦斯氣體探測報警器
|
☆產品名稱：瓦斯報警器
|
☆產品別稱：瓦斯氣體濃度探測報警器
|
☆供電電源：DC36V±15%
|
☆防護等級：IP65
|
產品簡介
----------------------------------------------------------------------
瓦斯氣體探測報警器（Mashgas alarm）由瓦斯氣體探測器(Mashgas detector)和瓦斯氣體報警控制器(Mashgas Controller兩部分組成。氣體檢測，也稱氣體探測。氣體探測器實時檢測瓦斯?jié)舛龋瑲怏w報警控制器接收氣體探測器檢測的濃度，并顯示，濃度一旦超標可聲光報警提醒，并可聯動噴淋、排風等外接設備，或者上傳電腦、發送手機短信等，防止危險事故的發生。
瓦斯氣體報警器產品特點：
◆ 測量準確：傳感器采用進口氣體敏感元件，精度高，零點漂移小，抗中毒性能好。
◆ 防爆型設計：可用于工廠條件的1、2區危險場合。
◆ 維修方便：傳感器采用數字化模組設計，現場更換時無需校零、標定。
◆ 聲光報警：氣體探測器可選配專用的防爆聲光報警器，實現現場聲光報警。
◆ 濃度顯示：氣體探測器可選配液晶濃度顯示，現場實時顯示濃度。
瓦斯氣體探測器與控制器組合安裝簡圖
瓦斯氣體探測報警器技術參數
| 檢測氣體 | 瓦斯 | 檢測原理 | 催化燃燒式 |
| 檢測范圍 | 0-99%LEL | 供電電源 | DC36V±15% |
| 功率 | ＜1W | 通訊方式 | M-BUS 兩總線 |
| 信號輸出 | 一組無源常開信號 | 連接線纜 | RVS 2×2.5mm2 |
| 準 確 度 | ±5%FS | 響應時間 | 催化燃燒式 T90＜30s |
| 材 料 | 鑄鋁 | 防爆鏈接螺紋 | G3/4″內螺紋 |
| 防爆標志 | Exd IIC T6 Gb | IP等級 | IP65 |
| 工作溫度 | -40℃～70℃ | 濕度范圍 | 10%RH～95%RH |
| 壓力范圍 | 86Kpa～106Kpa | 存儲溫度 | -25℃～55℃ |
| 外形尺寸 | 190×130×75mm | 重 量 | 1.5kg |
| 安裝方式 | 貼壁式、抱管式、穿管式 |
Mashgas alarm
Mashgas alarm composed of gas detector and controller.The detector monitors in real time the concentration of methane. The controller receives the detection results from detector, and displays the concentration. The controller sends the audible & visual alarm once the concentration over the scheduled value, and starts the linkage devices (sprayer, fan, etc.), or uploads to PC, sends short messages to mobiles, avoiding the dangerous accidents.
Feature of Mashgas Alarm
1. Accurate measurement: sensor with imported gas sensory unit, high precision, less zero shift, strong anti-poisoning.
2. Explosion-proof design: suitable for 1-area and 2-area dangerous site in firm.
3. Maintenance-free: sensor designed with digital module group, no need to zero setting and calibration.
4. Audible and visual alarm: gas detector if equipped with explosion-proof audible and visual alarm, sending audible & visual alarm on the spot.
5. Concentration display: gas detector if equipped with LCD, displaying the concentration on the spot.
Technical params of Mashgas alarm
Gas detection: Mashgas
Detection principle: Catalytic combustion type
Detection range: 0-99%LEL
Power Supply Voltage: DC36V±15%
capacity factor: ＜1W
Communication: Two M-BUS
Signal output: A group signal of passive constant opening
Connection wires: RVS 2×2.5mm2
Accuracy: ±5%FS
Response time: T90＜30s (Catalytic combustion)
Materials: Cast aluminum
Explosion-proof connection screw thread: G3/4″ internal thread
Outline dimension: 190×130×75mm
Weight: 1.5Kg
IP degree: IP65
Working temperature: -40℃～70℃
Humidity range: 10%RH～95%RH
Pressure range: 86Kpa～106Kpa
Storage temperature: -25℃～55℃
Installment: Wall mounted, embracing tube type, passing tube type
