產品型號：JSR1104C半自動運動粘度測定器
產品名稱：運動粘度測定器JSR1104C
產品說明：
JSR1104C半自動運動粘度測定器
一、符合GB/T265和IS03104標準
適用于測定液體石油產品的運動粘度
二、主要技術參數：
計時、數據處理及運動粘度值計算等功能均由儀器完成；
儀器設有校溫功能，可用高級別溫度計校正測溫及控溫精度。
控溫采用智能模糊邏輯＋變系數PID復合控溫方式，恒溫精度±0.1℃
測溫采用精密鉑電阻PT100
控溫范圍：常溫～100℃
控溫精度：±0.1℃
控溫方式：進口自動雙數顯溫控儀控溫
攪拌方式：電機攪拌
計時方式：單片機電子計時，可同時對四支粘度計計時
工作方式：自動計算出粘度值、自動篩選平行樣
容積尺寸：雙層玻璃缸Φ300×300（mm）
工作電源：AC220V±10％ 50HZ 功率：2000W
三、性能及特點：
1、儀器加熱采用電熱管加熱方式，進口數顯溫控儀控制溫度，控溫精度高，數字顯示直觀。
2、采用單片機計時，液晶屏顯示四路計時時間，計時完畢自動計算出粘度值。
3、儀器電源和浴缸分上下層連接，浴缸下面采用節能燈照明，以提高觀察時的清晰度。
4、采用電機攪拌減少浴缸內液體的溫度梯度，使溫度均勻，結果更準確。
5、儀器采用雙層玻璃套缸，控溫準確，安全可靠。
JSR1104C semi-automatic kinematic viscosity tester
I. Comply with GB/T265 and IS03104 standards
It is suitable for measuring the kinematic viscosity of liquid petroleum products
Ii. Main Technical parameters:
Timing, data processing and kinematic viscosity value calculation are performed by the instrument.
The instrument is equipped with temperature correction function, which can use high grade thermometer to correct temperature measurement and temperature control accuracy.
Intelligent fuzzy logic + variable coefficient PID composite temperature control method is adopted for temperature control, with constant temperature accuracy of ±0.1℃
The temperature is measured using precision platinum resistance PT100
Temperature control range: normal temperature ~ 100℃
Temperature control accuracy: ±0.1℃
Temperature control mode: Imported automatic dual-number display temperature controller
Stirring mode: motor stirring
Timing: microcontroller electronic timing, can be four viscosity meter at the same time
Working mode: calculate viscosity value automatically and screen parallel sample automatically
The volume size: double glass bowl Φ 300 * 300 (mm)
Power supply: AC220V± 10%, 50HZ Power: 2000W
Iii. Performance and Characteristics:
1, the instrument heating adopts electric heat pipe heating, imported digital display temperature controller temperature control, temperature control precision is high, intuitive digital display.
2. Single-chip microcomputer is used for timing. The LCD displays the four-way timing time, and automatically calculates the viscosity value after the timing is finished.
3. The instrument power supply and the bathtub are connected at the upper and lower levels. Energy-saving lamps are used to illuminate the bathtub to improve the clarity of observation.
4, the use of motor stirring to reduce the temperature gradient of the liquid in the bathtub, so that the temperature is uniform, more accurate results.
5, the instrument adopts double glass cylinder, temperature control is accurate, safe and reliable.
