UT152-VR/V24溫度調節器
Universal Output
User selectable for Relay, Voltage Pulse and Current outputs.
• Relay output: ON/OFF control, Time-proportional PID control
• Voltage Pulse output: Time-proportional PID control
• Current output: Continuous PID control
Heating/Cooling Control has two sets of universal outputs.
• Any combinations of Relay, Pulse and Current outputs are available.
Drive a Motorized Control Valve by using Position-Proportional PID.
• The position-proportional PID control function has two sets of relay outputs for
direct / reverse rotation of motorized control valve.
• The slide wire input to feed back the valve position is also available.
Auto-Tuning （AT） Function
The following conditions can be set in order to
increase the accuracy of calculating PID constants
using AT .
1） Two types of algorithms to calculate PID constants
are available for selection.
Normal: Fast-rising PID constant
Stable: Slow-rising PID constant
2） High and low output limits can be set individually for
control output values during AT runtime.
UT152特點：
1、1/8DIN封裝結構纖細設計，節省空間，48（W）x96（H）x100（D）（mm）
2、大屏4位LED顯示
3、防塵防滴的面板設計符合IP55標準
4、適用于熱電偶、RTD及DC mV/號的通用輸入
5、可選的測量值（PV）再傳輸功能
6、可選的定時器功能
7、可選的加熱器斷偶報警及雙報警輸出繼電器
8、標準通用電源（100V～240V AC）與選配電源24V AC/DC）
9、可選的RS485通信功能，支持MODBUS、PC-Link&Ladder協議
UT152溫控器|日本橫河溫控器|日本橫河yokogawa溫控器選型表：
型號 | 后綴碼 | 說明 | ||
UT152 | 溫度調節器（標準型） | |||
控制輸出 | -R | 繼電器接點輸出 | ||
-V | 電壓脈沖輸出 | |||
-A | 4～20mA 輸出 | |||
固定碼 | N | 固定為N | ||
可選項 | /AL | 報警輸出（2點） | ||
/HBA | 加熱器斷線報警另加2點報警輸出 | |||
/EX | 由外部接點切換到SP1或SP2，由外部接點啟動計時器 | |||
/RET | 4～20mA傳送輸出（PV值） | |||
/RS | 通信（RS485，協議為MODBUS，PC-link，Ladd | |||
/V24 | 供電電源：24VDC/24VAC | |||
UT152溫控器|日本橫河溫控器|日本橫河yokogawa溫控器選型表
型號 | 后綴碼 | 說明 | ||
UT152 | 溫度調節器（加熱/冷卻型） | |||
加熱端 | -R | 繼電器接點輸出 | ||
控制輸出 | -V | 電壓脈沖輸出 | ||
-A | 4～20mA 輸出 | |||
冷卻端 | R | 繼電器接點輸出 | ||
控制輸出 | V | 電壓脈沖輸出 | ||
A | 4～20mA 輸出 | |||
可選項 | /AL | 報警輸出（2點） | ||
/HBA | 加熱器斷線報警另加2點報警輸出 | |||
/EX | 由外部接點切換到SP1或SP2，由外部接點啟動計時器 | |||
/RS | 通信（RS485，協議為MODBUS，PC-link，Ladd | |||
/V24 | 供電電源：24VDC/24VAC | |||
選型舉例：
UT152-RN/V24、UT152-RN/RS、UT152-RN/AL、UT152-RN/RET
UT152-VN/V24、UT152-VN/RS、UT152-VN/AL、UT152-VN/RET
UT152-AN/V24、UT152-AN/RS、UT152-AN/AL、UT152-AN/RET
UT152-RR/V24、UT152-RR/RS、UT152-RR/AL、UT152-RR/RET
UT152-RV/V24、UT152-RV/RS、UT152-RV/AL、UT152-RV/RET
UT152-RA/V24、UT152-RA/RS、UT152-RA/AL、UT152-RA/RET
UT152-VR/V24、UT152-VR/RS、UT152-VR/AL、UT152-VR/RET
UT152-VV/V24、UT152-VV/RS、UT152-VV/AL、UT152-VV/RET
UT152-VA/V24、UT152-VA/RS、UT152-VA/AL、UT152-VA/RET
UT152-AR/V24、UT152-AR/RS、UT152-AR/AL、UT152-AR/RET
UT152-AV/V24、UT152-AV/RS、UT152-AV/AL、UT152-AV/RET
UT152-AA/V24、UT152-AA/RS、UT152-AA/AL、UT152-AA/RET
