當前位置：卓爾瑞華（北京）科技有限公司>>WIKA壓力及溫度儀表>>WIKA DI35 面板安裝式數顯儀標準信號多功能輸入 2個變送器輸入

WIKA DI35 面板安裝式數顯儀標準信號多功能輸入 2個變送器輸入

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號DI35

品牌

廠商性質代理商

所在地北京市

在線詢價 收藏產品查看聯系電話

聯系方式：仇立新查看聯系方式

更新時間：2022-08-02 13:50:01瀏覽次數：439次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  WIKA壓力及溫度儀表

全部產品列表

暫無信息

卓爾瑞華（北京）科技有限公司

經營模式：代理商

商鋪產品：93條

所在地區：北京北京市

聯系人：仇立新（銷售工程師）

詢價 給他留言

產品簡介

WIKA DI35 面板安裝式數顯儀標準信號多功能輸入 2個變送器輸入

詳細介紹

接口尺寸：	面板安裝（mm）	加工定制：	是
防護等級：	IP65	測量范圍：	-1999-9999（kPa）
類型：	數字壓力變送器	防爆等級：	無
型號：	DI35	測量介質：	液體氣體
精度等級：	0.01	品牌：	WIKA/威卡
輸出信號：	4-20（mA）	電源電壓：	10-30（V）

WIKA DI35 面板安裝式數顯儀標準信號多功能輸入 2個變送器輸入

Digital indicator for panel mounting
Model DI35

Digital indicator model DI35

   Applications
    Machine building and plant construction
    Test benches
    Level measurement
    General industrial applications

   Special features
    Multi-function input （29 calibrated input configurations） or double input （0/4 ... 20 mA, DC 0 ... 10 V） with calculation function
    Accuracy ±0.01 ... 0.1% of the span ±1 digit （depends on the input configuration）
    Linearisation with up to 30 programmable points
    MAX/MIN memory, HOLD/TARA/totalizer function
    Up to four freely programmable switch contacts （optionally）

Description
The digital indicator DI35 is a multi-functional and very accurate digital indicator for a wide range of measuring requirements. It is available in two different basic types:

DI35-M
The version has a multi-function input with 29 different calibrated input configurations that can be selected via terminal connections and the input signal in the instrument configuration. The display can permanently show the MIN or MAX value. Moreover, a totalizer function is integrated.

DI35-D
The version is equipped with two inputs for standard signals （0/4…20 mA and DC 0…10 V） that can be used in any combination. The display can show one of the two input signals or a calculated value. Calculations can be made by means of the four basic arithmetic operations （+ - * /） and an additional constant multiplier. Switching channels can be performed time controlled, by pressing a key or via digital input.

In addition, both versions offer the possibility to calibrate sensors and linearise using up to 30 points. This allows further adaptation of the displayed values to different sensor signals and application requirements.

The standard features are completed by a HOLD and a TARA function for the correction of offset shifts and sensor drifts.

The sampling rate and display time can be configured, the display can be dimmed. Unauthorised alteration of the set instrument parameters can be prevented via different user levels, in conjunction with a freely-selectable access code.

Optionally available are a transmitter power supply, up to four freely programmable switch contacts, an analogue output signal and a serial interface.

All configuration and programming can be carried out through the front-panel keys.

Specifications

    Accuracy/measuring errors of the input signals
    Inputs with factory calibration


   Inputs for sensor calibration


   Terminal configuration
    Terminal strip above


   Terminal strip below for DI35-D


    Dimensions in mm


   Scope of delivery
    Model DI35 digital indicator
    Sealing
    Mounting screws
    Operating instructions
    Punched paper with 28 unit labels for selection

    Ordering information
    Model / Input / Alarm outputs / Power supply / Transmitter power supply / Analogue output signal / Interface /
    Ingress protection / Instrument configuration / Additional order information

關鍵詞：壓力變送器