污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
卓爾瑞華（北京）科技有限公司
會員1.png)
卓爾瑞華（北京）科技有限公司
| 參 考 價 | 面議 |
產品型號O-10（T）
品 牌
廠商性質代理商
所 在 地北京市
聯系方式：仇立新查看聯系方式
更新時間：2022-08-02 11:16:18瀏覽次數：670次
聯系我時，請告知來自 環保在線WIKA O-10(T) O-10(5) 通用型壓力變送器 用于液壓氣壓泵壓縮機
| 接口尺寸： | M12*1（mm） | 加工定制： | 是 |
| 防護等級： | IP65 | 測量范圍： | 0-6to 0-600bar（kPa） |
| 類型： | 陶瓷型壓力變送器 | 防爆等級： | 無 |
| 型號： | O-10（T） O-10（5） | 測量介質： | 液體 氣體 |
| 精度等級： | 0.5 | 品牌： | WIKA/威卡 |
| 輸出信號： | 4-20（mA） | 電源電壓： | 10-30（V） |
WIKA O-10（T） O-10（5）
通用型壓力變送器 用于液壓氣壓泵壓縮機
OEM pressure transmitter for general industrial applications
Models O-10 （T）, O-10 （5）
Pressure transmitter model O-10 （T）
Applications
Hydraulics and pneumatics
Pumps and compressors
Machine building
Building services
Special features
Measuring ranges from 0 … 6 to 0 … 600 bar
Non-linearity 0.5 %
Standard industrial signals
Electrical connection: Angular connector form A and C,
circular connector M12 x 1, Metri-Pack series 150,
cable outlet 2 m unshielded or shielded
Many internationally customary process connections
Description
The model O-10 pressure transmitter has been developed for a wide variety of industrial applications. The large range of process and electrical connections as well as all commonly used pressure ranges and output signals set the model O-10
apart.
For applications in which water is used as a medium we recommend a 5-fold overpressure safety in combination with a condensation-tight case.
Due to its specifications, its features and its price, the pressure transmitter is ideally suited to OEM applications, with an annual quantity requirement of more than 1,000 units of each article number. Accordingly, the minimum order quantity is 50 units per article number.
The model O-10 has been designed specifically for the demands of the global market. The pressure transmitter offers international units and the corresponding approvals for the North American and Russian markets.
It goes without saying that the model O-10 can be delivered with customer-specific labelling （e.g. company logo and model designation）.
Versions
Model O-10 （T）
Standard version
Model O-10 （5）
With 5-fold overpressure limit and condensation-tight case
For applications with water as a medium we recommend a 5-fold overpressure safety for protection against water hammer
effects, and a condensation-tight case.
Measuring ranges
Model O-10 （T）
Output signals
Model O-10 （T）
Voltage supply
Power supply
The power supply depends on the selected output signal.
4 ... 20 mA: DC 8 ... 30 V
DC 0.5 ... 4.5 V: DC 8 ... 30 V
DC 0 ... 5 V: DC 8 ... 30 V
DC 1 ... 5 V: DC 8 ... 30 V
DC 0 ... 10 V: DC 14 ... 30 V
DC 0.5 ... 4.5 V （ratiometric）: DC 4.5 ... 5 V
The power supply for the pressure transmitter must be made via an energy-limited electrical circuit in accordance with section 9.4 of UL/EN/IEC 61010-1, or an LPS to UL/EN/IEC 60950-1, or class 2 in accordance with UL1310/UL1585 （NEC or CEC）.
The power supply must be suitable for operation above 2,000 m should the pressure transmitter be used at this altitude.
Total current consumption
Current output:
The total current consumption corresponds to the value of the output signal current （4 ... 20 mA）, maximum 25 mA
Voltage output:
5 mA
Reference conditions （per IEC 61298-1）
Temperature
15 ... 25 °C
Atmospheric pressure
860 ... 1,060 mbar
Humidity
45 ... 75 % relative
Power supply
Current output: DC 14 V
Voltage output: DC 24 V
Ratiometric output signal: DC 5 V
Nominal position
Calibrated in vertical mounting position with pressure connection facing downwards.
Time response
Settling time
< 2 ms
Accuracy data
Model O-10 （T）
Non-linearity （per IEC 61298-2）
≤ ±0.5 % of span BFSL
A different non-linearity applies to some measuring ranges, see "Measuring ranges O-10 （T）".
Measuring deviation of the zero signal
≤ ±0.5 % of span
A different measuring deviation applies to some measuring ranges, see "Measuring ranges model O-10 （T）".
Accuracy at reference conditions
≤ ±1.2 % of span
Temperature error at 0 ... 80 °C
≤ ±1.5 % of span
Long-term stability
≤ ±0.3 % of span/year
Model O-10 （5）
Non-linearity （per IEC 61298-2）
≤ ±0.5 % of span BFSL
Measuring deviation of the zero signal
≤ ±1 % of span
Accuracy at reference conditions
≤ ±2.0 % of span
Temperature error at 0 ... 80 °C
Mean temperature coefficient of zero point:
Typical: 0.3 % of span/10 K
Maximum: 0.6 % of span/10 K
Mean temperature coefficient of span:
≤ ±0.1 % of span/10 K
Long-term drift
≤ ±0.8 % of span/year
Operating conditions
Model O-10 （T）
Ingress protection （per IEC 60529）
For ingress protections see "Electrical connections model O-10 （T）"
The stated ingress protection only applies when plugged in using mating connectors that have the appropriate ingress protection.
Vibration resistance （per IEC 60068-2-6）
20 g （20 ... 2,000 Hz, 120 min.）
Shock resistance （per IEC 60068-2-27）
40 g （6 ms）, mechanical shock
Service life
10 million load cycles
Free fall test
Resistant to an impact onto concrete from 1 m
Permissible temperatures
Medium: -30 ... +100 °C
Ambient: -30 ... +100 °C
Storage: -30 ... +100 °C
Model O-10 （5）
Ingress protection （per IEC 60529）
For ingress protections see "Electrical connections model O-10 （5）"
The stated ingress protection only applies when plugged in using mating connectors that have the appropriate ingress protection.
Vibration resistance （per IEC 60068-2-6）
20 g （20 ... 2,000 Hz, 120 min）
Shock resistance （per IEC 60068-2-27）
40 g （6 ms）, mechanical shock
Service life
10 million load cycles
Free fall test
Resistant to an impact onto concrete from 1 m
Permissible temperatures
Medium: -40 ... +100 °C
Ambient: -25 ... +80 °C
Storage: -25 ... +80 °C
Other temperature ranges on request
Process connections
Materials
Non-wetted parts
Stainless steel 316L
PBT GF 30
Cable material （cable outlet） PVC
Wetted parts
Stainless steel 316L
13-8 PH
For sealing materials see "Process connections"
Oil and grease free versions are available on request.
Electrical connections
Model O-10 （T）
Available connections
Connection diagrams
Complete instrument
CE conformity
Pressure equipment directive
97/23/EC
EMC directive
2004/108/EC, EN 61326 emission （group 1, class B） and immunity （industrial application）
RoHS conformity
Yes
Approvals
cULus, safety （e.g. electr. safety, overpressure, ...）, USA, Canada
GOST-R, import certificate, Russia
Approvals see website
Accessories and spare parts
Mating connector
Only use the accessories and spare parts listed above, otherwise it could lead to the loss of theapproval.
Ordering information
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
