A-2型玻璃儀器氣流烘干器廠家,生產玻璃烘干機
A-2 面議污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
卓爾瑞華（北京）科技有限公司
會員1.png)
卓爾瑞華（北京）科技有限公司
| 參 考 價 | 面議 |
產品型號516.11
品 牌
廠商性質代理商
所 在 地北京市
聯系方式：仇立新查看聯系方式
更新時間：2016-08-24 22:25:25瀏覽次數：325次
聯系我時，請告知來自 環保在線WIKA 516.11 516.12 絕壓表 波登管或膜盒式 標準型 80表圓
| 類型： | 真空壓力表 | 聯接型式： | 多種連接 |
| 型號： | 516.11,516.12 | 精度等級： | 1.6 |
| 品牌： | WIKA/威卡 | 環境溫度： | 00（℃） |
| 加工定制： | 是 | 公稱直徑： | 80（mm） |
| 測量范圍： | 0-1000mbar（MPa） |
WIKA 516.11 516.12 絕壓表 波登管或膜盒式 標準型 80表圓,
AbsoIute Pressure Gauges
Compact Design
With Capsule Element • Model 516.11
With Bourdon Tube • Model 516.12
Service intended
Measurement of absolute pressure excluding the effect of barometric pressure variation.
Suitable for all clean and dry gaseous media that will not attack copper alloy and aluminium parts.
Design
Small compact design, varied possibility for installation, WIKA trade pattern DT-GM 87 10 226 Variable pressure entry
Nominal size
80 mm
Accuracy class per EN 837-3 /6
1.6
Scale ranges per EN 837-3 /5
Model 516.11: 0 ... 16 to 0 ... 1000 mbar absolute pressure
Model 516.12: 0 ... 1.6 to 0 ... 16 bar absolute pressure.
Working pressure
Steady: full scale value
Fluctuating: 0.9 x full scale value
Overpressure safety
Model 516.11: 1 bar absolute （atmospheric pressure） with all scale ranges
Model 516.12: full scale value
Operating temperature
Ambient: -20 ... +60 °C
Medium: +70 °C maximum
Temperature error
Additional error when temperature of the pressure element deviates from +20 °C
Rising temperature: +0.3%/10 K of true scale value
Falling temperature: -0.3%/10 K of true scale value
Degree of protection
IP 66 per EN 60 529 / IEC 529
Standard features
Pressure connection （exposed to pressure medium）
Threaded entry per EN 837-1 /7.3
G E female
Pressure element （exposed to pressure medium）
Model 516.11: Material Cu-alloy
Model 516.12: Material stainless steel
The pressure element is evacuated and constitutes pressure datum
Movement （exposed to pressure medium）
Material: Cu-alloy
Dial （exposed to pressure medium）
White aluminium with black lettering
Pointer （exposed to pressure medium）
Black aluminium pointer
Zero adjustment
Adjusting provisions at case back （model 516.11）
Case （exposed to pressure medium）
Black aluminium. Case retains process pressure
Window （exposed to pressure medium）
Instrument glass
Sealing rings （exposed to pressure medium）
NBR （Buna rubber）
Bezel ring
Black aluminium
Gauge mounting
Requires mounting by means of rigid tailpipes, optionally threaded studs at case back.
Panel mounting or surface mounting rings optionally available
Optional extras
Other pressure connection
Mounting studs with bracket
Panel mounting ring
Surface mounting ring
Male thread pressure entry
Pressure entry with miniature flange DN 10/16 to DIN 28 403
Radial pressure entry other than bottom
Operating principle
- The case machined from solid aluminium bar retaines the system pressure, whereas the pressure element of either the capsule or the bourdon tube type constitutes the zero pressure datum.
- The particularly shaped capsule fully collapses to provide over-pressure safety independent of the scale range.
- Any pressure applied is measured against the sealed pres sure datum to exclude the effect of ambient pressure variation.
Dimensions
Standard version
Ordering information
State:
Model / Nominal size / Scale range / Size and location of connection / Optional extras required
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
