污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
上海靜福減震器制造有限公司
會員1.png)
上海靜福減震器制造有限公司
閱讀：131發布時間：2016-6-18
本文圖片及文字來源于上海淞江減震器集團http://www.jiuhu.cc/如有任何疑問請周工
上海淞江減震器集團是國內*批制造管道減振設備的廠家，主要生產橡膠接頭、可曲撓橡膠接頭、阻尼彈簧減振器、橡膠隔震器、金屬和非金屬補償器、管道伸縮器等管道減振給排水設備。技術創新是淞江集團多年來孜孜不倦的追求，也正是淞江產品深受市場*的根本原因。
導致異徑橡膠接頭爆裂的原因比較多，可以一一排查。首先確定管路的壓力是否過大，一般情況橡膠采用1.0MPa壓力的橡膠接頭zui大壓力在2.0MPa范圍的，可以保證不爆裂，但如果壓力過大的話應該選用更高壓力的球體(1.6MPa)，1.6MPa的試壓范圍在3.0MPa。所以安裝時應安裝設計人員的要求，安裝相應壓力的橡膠接頭。
??
其次是采用劣質的橡膠材質生產加工的橡膠接頭;橡膠接頭安裝在戶外應防止高溫、臭氧油及酸堿環境，嚴禁暴嗮、雨淋、風濁。遇到這種情況應該好的橡膠材質，如：氯丁橡膠、三元乙丙橡膠、硅橡膠、氟橡膠等配方，采用好的橡膠可加長橡膠的使用時間，但橡膠天生懼怕曬、淋、風，用在室外或向陽迎風的管道應搭建遮陽架。
再者的原因?qū)儆诩夹g(shù)問題;橡膠接頭在硫化成型時zui重要也是zui關鍵的問題要看接口處的硫化，大多數橡膠接頭出先爆裂都是接口處，因?yàn)榻涌诘墓に嚤容^復雜繁瑣，所以容易出現問題。
Causes the different diameter rubber joint to burst the reason to be quite many, may one one investigation. First determine the pipeline pressure is too big, general situation of rubber by rubber pressure 1.0MPa joint maximum pressure in the range of 2.0MPa, can guarantee does not burst, but if the pressure is too large should choose more high pressure sphere (1.6Mpa), the 1.6Mpa pressure in the range of 3.0 MPa. Therefore, the installation should be installed in the design requirements, the installation of the corresponding pressure of the rubber joint.
Followed by the use of inferior rubber material production and processing of rubber joints; rubber connector is installed in the outdoor should prevent heat, ozone oil and acid and alkali environment, non violent Sai, rain, wind dampness. Encounter this kind of situation should be a good rubber material, such as chloroprene rubber, ternary ethylene propylene rubber, silicone rubber, fluorine rubber formula, the rubber can lengthen the using time of rubber, but rubber born afraid of sun, air shower,, in outdoor or sunny wind pipe should build the sunshade frame.
Moreover the reason is a technical problem; rubber joint is the most important in the vulcanization molding is one of the most critical problems to sulfide interface, most of the rubber joint first burst is interface, because interface technology is relatively complicated, so prone to problems.
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份