當前位置：上海靜福減震器制造有限公司>>>>武漢過水橡膠軟管接頭

武漢過水橡膠軟管接頭

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質生產商

所在地上海市

在線詢價 收藏產品查看聯系電話

聯系方式：黃先生查看聯系方式

更新時間：2016-06-18 16:20:45瀏覽次數：718次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  橡膠接頭

暫無信息

上海靜福減震器制造有限公司

經營模式：生產廠家

商鋪產品：198條

所在地區：上海上海市

聯系人：黃先生（銷售）

詢價 給他留言

產品簡介

武漢過水橡膠軟管接頭，單球法蘭式耐壓不銹鋼軟管接頭

詳細介紹

武漢過水橡膠軟管接頭，單球法蘭式耐壓不銹鋼軟管接頭

1.按使用性能分為通用、特種、耐熱三大類。

通用類：適用于輸送溫度為﹣15℃~80℃的水、濃度10%以下的酸溶液或堿溶液。

特種類：適用于特殊性能的要求，如耐油、耐塞、耐臭氧、耐磨或耐化學腐蝕。

耐熱類：適用于輸送溫度高于80℃的水

2.按結構形式分為單球體、雙球體、三球體、彎頭球體，,風壓盤管體等。每種形式又可分同心等徑、同心異徑、偏心異徑三類。

3.按外形分為：

同心同徑、同心異徑、偏心異徑。

3.按產品與管路的連接形式可分為法蘭連接、螺紋連接和卡箍連接、螺紋管法蘭連接等。

4.按工作壓力分：

0.25MPa、0.6MPa、1.0MPa、1.6MPa、2.5MPa、6.4MPa六個等級。

上海淞江減震器集團是國內*批制造管道減振設備的廠家，主要生產可曲撓橡膠接頭、阻尼彈簧減振器、橡膠隔震器、金屬和非金屬補償器、管道伸縮器等管道減振給排水設備。技術創新是淞江集團多年來孜孜不倦的追求，也正是淞江產品深受市場*好評的根本原因。

以上圖片及文字來源于上海淞江減震器集團http://www.jiuhu.cc/，如有任何疑問請周工

Wuhan over water rubber hose connectors, single ball flange type pressure resistant stainless steel hose connectors

1 according to the use of performance is divided into general, special, heat three categories.

General: suitable for conveying the temperature of ~80 DEG C 15 water, less than 10% of the concentration of acid or alkaline solutions.

Special type: suitable for special performance requirements, such as oil, Naisai, ozone resistance, chemical corrosion or abrasion.

Heat resistant: suitable for conveying water above 80

2 according to the structure of the form is divided into single ball, double ball, three ball, elbow ball, and the wind pressure plate tube etc.. Each form can be divided into three categories, such as concentric, concentric, eccentric, eccentric, and so on.

3 according to the outline:

Concentric diameter, concentric different diameter, eccentric different diameter.

3 according to the product and pipeline connection form can be divided into flange connection, threaded connection and clamp connection, threaded pipe flange connection and so on.

4 according to work pressure:

0.25MPa, 0.6MPa, 1.0MPa, 1.6MPa, 2.5MPa, 6.4MPa six levels.

Shanghai Songjiang absorber group is the first batch of domestic manufacturing pipeline vibration equipment manufacturers, the main production can be flexible rubber joint, damping spring and damper, rubber isolator, metal and nonmetal compensator, pipeline expansion device reducing pipe water supply and drainage equipment. Technology innovation is Songjiang group for many years tireless pursuit, is Songjiang products by market comments from the root cause.

Above picture and text source in Shanghai Songjiang shock absorber group website ，if any questions, please contact the working week

關鍵詞：減震器補償器