GF+SIGNET 8250 液位變送器,3-8250,3-2250,8250液位變送器是和2250液位傳感器和2450壓力變送器兼容的。這種儀表有現場型和盤裝型結構。儀表可有單路和雙路輸入，對每路輸入都配備了可刻度和倒向的4-20mA輸出。每塊表配置了兩個繼電器，加上它能夠提供的兩個附加在外部的繼電器繼電器工作可選高、低，觸發、關閉，并包括全部繼電器的延時和啟動時間調節。

詳細介紹

GF+SIGNET 8250 液位變送器,3-8250,3-2250,Signet

8250 液位變送器

　　 Signet 8250液位變送器是和2250液位傳感器和2450壓力變送器兼容的。這種儀表有現場型和盤裝型結構。儀表可有單路和雙路輸入，對每路輸入都配備了可刻度和倒向的4-20mA輸出。每塊表配置了兩個繼電器，加上它能夠提供的兩個附加在外部的繼電器（總共為4個繼電器）。繼電器工作可選高、低，觸發、關閉，并包括全部繼電器的延時和啟動時間調節。儀表還可以接收通過8058轉換的，其它輸出4-20mA的傳感器。自動的液位-容積的轉換，允許對罐容積和液位的顯示和控制。它們的單位可用加侖（gallons），千克（kilograms），英尺（feet）或米（meters），簡單地輸入你的罐或容器的尺寸，儀表將根據測量的液位計算出相應的值。

技術 數 據

兼容性：signet2450數字輸出溫度傳感器
或其他制造商提供4-20mA傳感器
顯示：數字式2X16液晶顯示，用戶可調節5檔
4按鍵；更新時間：每秒
輸入電源：12-24VDC ±10%額定 250mA max
傳感器電源：5VDC ±1%@25℃額定
電流輸出：4-20mA
*大線圈阻抗：50Ωmax@12V;325Ωmax@18V;600Ωmax@24V
刷新時間：300ms
工作溫度：-10℃-70℃
存儲溫度：-15℃-80℃
標準和論證：CE，UL
制造符合ISO9001：2000質量
ISO14001：2004環境管理標準。

英文簡介

8250 ProcessPro® Level Transmitter

Signet 8250 Level Transmitters are compatible with the Signet 2250 Level Sensor and 2450 Pressure Sensor. The instrument is available in field and panel mount configurations, single or dual-channel input and equipped with one 4 to 20 mA output, fully scaleable and reversible for each input channel. The unit also features two relays, plus the ability to support two additional externally mounted relays (for a total of four). Relay operations is selectable for High, Low, Window or Off, and includes fully adjustble hysteresis and trigger time delay.

The unit also has the ability to accept other level sensors with 4 to 20 mA output via the Signet 8058 Signal Converter. Automatic level-to-volume conversion allows display and control of tank level and/or volume in units such as gallons, kilograms, feet or meters. Simply enter the dimensions of your tank or vessel, and the instrument will calculate volume from the level measurement.

Fields of Application:

Continuous level and/or volume monitoring
Local or remote display
Fill start/stop control
Pump protection
Inventory Management
Storage Tank Monitoring
Pump Station Control
Plating Lines
Neutralisation Tanks

Advantages:

Compatible with Signet 2450 Pressure Sensors
Single or Dual Channel Input
4 to 20 mA Outputs Fully-Scaleable, Reversible and Assignable to Either or Both Channels (8250-3X versions)
Advanced Relay Control
Output Simulation
Manual (up to 10 pts.) and Automatic Level-to-Volume Conversion
Display Level, Volume or Both
Units for Level: ft., in., m, cm, %
Units for Volume: gal., in3, lbs., l, m3, kg, %
Specific Gravity Entry for Use with Pressure Sensors and Mass Unit Conversion

Standards: