如下為我司愛澤工業IZE-Industries常備庫存MOLYKOTE相關產品，歡迎索取樣本資料和產品信息。

    
MOLYKOTE潤滑脂HSC PLUS PASTE 1KG愛澤工業 ize-industries

MOLYKOTE潤滑脂HSC PLUS PASTE產品介紹
對于經受高溫的金屬/金屬組合以及通常用于螺栓連接的摩擦接觸，不含鉛或鎳。 適用于低速潤滑點，承受高溫和腐蝕作用，并且要求低而恒定的摩擦系數。 作為導電部件的接觸潤滑劑。已成功用于燃氣和蒸汽輪機的雙頭螺栓，柴油發動機渦輪增壓器的雙頭螺栓，化工廠和石化廠的法蘭連接。

For metal/metal combinations that are subjected to high temperatures and frictional contacts that typically for bolted joints, are free from lead or nickel. Suitable for lubrication points with low speeds, subjected to high temperatures and corrosive effects, and also require a low and constant coefficient of friction. As a contact Lubricant for electrically conducting components.Used successfully for stud bolts of gas and steam turbines, stud bolts of turbochargers of diesel engines, flanged connections in chemical and petrochemical plants.

    
MOLYKOTE潤滑脂G68 25K 愛澤工業 ize-industries

MOLYKOTE潤滑脂G68介紹
Molykote G68是一種高耐水性，低摩擦系數的塑料和鋼齒輪潤滑脂。這種先進材料由鋰皂，礦物油，聚α-烯烴，EP添加劑和固體潤滑劑組成。該產品主要用于電動牙刷和碎紙機的齒輪。它還與大多數塑料具有出色的相容性。

Molykote G68是一種米色的半合成潤滑脂。在20攝氏度下產品的密度為0.85克/ cc，使用溫度在-30至140攝氏度之間。根據標準化組織（ISO）2176，Molykote G-68的滴點為190攝氏度。動力學/運動粘度為75厘斯。該先進產品能夠用作潤滑塑料基材以及更先進的汽車和航天應用的簡單家用潤滑脂。它有25kg桶裝，5kg容器和1kg罐裝。

可以使用油脂槍，刷子，自動潤滑裝置施加Molykote G 68。它也適用于中央潤滑系統的輸送。清潔接觸點并涂抹潤滑脂。由于彈性體和塑料質量的差異，建議MOLYKOTE-G-68對收縮，膨脹，應力裂紋形成以及硬度和強度的變化進行兼容性測試。創新產品不應與任何其他潤滑脂混合，因為它可能會改變潤滑特性，并且可能無法按其配制的方式執行。

Molykote G 68 is a high water resistance, low coefficient of friction, plastic and steel gear grease. This advanced material is composed of lithium soap, mineral oil, polyalphaolefine, EP additives and solid lubricants. The product is primarily used in gears of electrical tooth brushes and paper shredders. It also has excellent compatibility with most plastics.

Molykote G 68 is a semi-synthetic grease that is beige in color. The density of the product at 20 degrees Celsius is .85 grams per cc and the service temperature is between -30 to 140 degrees Celsius. In accordance to the International Organization for Standardization (ISO) 2176 the dropping point of Molykote G-68 is at 190 degrees Celsius.  Kinetic/ kinematic viscosity is 75 centistokes and the load carrying capacity is 1900 4 ball weld, N. This advanced product is capable of for being used as a simple household grease for lubricating plastic substrates as well as in more advanced automotive and aerospace applications. It is available in 25kg pails, 5kg containers and in 1kg cans.

Molykote G 68 may be applied by using a grease-gun, brush, spatula, or an automatic lubricating device. It is also suitable for delivery in a central lubricating system. Clean points of contact and apply the lubricating grease. Because of a variation in quality of elastomers and plastics, it is recommended have a Molykote-G-68compatibility test carried out for shrinkage, swelling, stress-crack formation and changes in hardness and strength. The innovative product should not be mixed with any other grease because it may change the characteristics lubrication and it may not perform the way that it was formulated to perform.

MOLYKOTE潤滑脂其他常用型號：
MOLYKOTE潤滑脂G68
MOLYKOTE潤滑脂G1056
MOLYKOTE潤滑脂G1067
MOLYKOTE潤滑脂G0010
MOLYKOTE潤滑脂G0050
MOLYKOTE潤滑脂G1057
MOLYKOTE潤滑脂G0051
MOLYKOTE潤滑脂G0050
MOLYKOTE潤滑脂G4501
MOLYKOTE潤滑脂G2001
MOLYKOTE潤滑脂G1021
MOLYKOTE潤滑脂G4000
MOLYKOTE潤滑脂G3407
MOLYKOTE潤滑脂G5008
MOLYKOTE潤滑脂G407
MOLYKOTE潤滑脂G0102
MOLYKOTE潤滑脂G0052
MOLYKOTE潤滑脂G4700
MOLYKOTE潤滑脂G1502
MOLYKOTE潤滑脂G2088
MOLYKOTE潤滑脂HSC PLUS PASTE

如果您有任何關于MOLYKOTE的相關技術咨詢或者需要產品的相關技術資料與文檔，請隨時致愛澤工業，或者訪問我們將盡全力解決您的問題。