西門子模塊6ES7221-1BH22-OXAO 西門子模塊6ES7221-1BH22-OXAO 

應用

Iron smoothing reactors for DC operating mechanisms

Smoothing reactors are used on the DC side of converter sets. DC flows through them.

• Iron smoothing reactors as series inductance for DC motors (series reactors, 4EM, 4ET series). 
  Its use is required to achieve perfect commutation and reduction of motor losses, if, owing to the converter connection used, the DC ripple is too high for the DC motor. Reactors have close to a constant inductance of L up to the rated direct currentI_dn.
• Iron smoothing reactors with selectable inductance and current (series 4EM, 4ET).
  Individual adjustment of the smoothing requirements of the loads fed by the converters is possible with this reactor. Selection of the reactors takes place in accordance with the E energy content required, which is established from the inductance required (or the course of inductance over the current) and the rated direct currentI_dn. Different courses of inductance can be achieved through appropriate dimensioning. 

Application_4EM, 4ET, single-phase reactors

附件

Terminal covers for protection against accidental touch 
of free busbar connections (DIN VDE 0106 Part 100/EN 50274)

The covers are suitable for all reactors and filters with one-hole flat connections. The assignment of the covers to the reactors and filters can be carried out via the diameter of the connection hole, please see “Configuration”.

If not stated otherwise in the Technical specifications, the use of the covers enables touch protection with the back of the hand against accidental touch of live parts according to BGV A2.

更多信息

The following applies to the versions (see ordering data):

Standard (Catalog LV 60):

Standard modified:

• The values in the ordering data apply.
• Boundary conditions, standards and approvals may differ from those of the LV60 catalog products.
• More data available from Technical Support, PRODIS or by 
  : Anfrage@mdexx.com