當前位置：上海坦?jié)娗餇栯娖骺萍加邢薰?/a>>>溫度開關過載保護器>>德國勒密拖Limitor GmbH>>德國Limitor GmbH溫度保護開關熱保護器 Y系列 40-150°C 6.5A (Y82)

德國Limitor GmbH溫度保護開關熱保護器 Y系列 40-150°C 6.5A (Y82)

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質生產商

所在地

在線詢價 收藏產品查看聯系電話

聯系方式：孔德俊查看聯系方式

更新時間：2022-08-22 19:13:22瀏覽次數：200次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  溫度開關過載保護器

德國特密克Thermik

五岳Wuyue

中國臺灣國煜Kuoyuh

美國艾默生Emerson

坦?jié)娗餇朤pqe

韓國世紀SEKI

德國勒密拖Limitor GmbH

森薩塔Sensata Klixon Airpax

全部產品列表

暫無信息

上海坦?jié)娗餇栯娖骺萍加邢薰?/a>

經營模式：生產廠家

商鋪產品：818條

所在地區：上海上海市

聯系人：孔德俊（銷售經理）

詢價 給他留言

產品簡介

功能特點BimetallicswitchYAreaofApplicationThecurrentandtemperaturelimiterYisusedwherever

詳細介紹

功能特點

Bimetallic switch Y

Area of Application
The current and temperature limiter Y is used wherever, on one hand, protection against overtemperatures as well as against overcurrents is required, and on the other hand, automatic switch on function of the device to be protected - subsequent to a follow-on cooling down period - is prohibited or undesired.
Mounting brackets or clips available.

Function
The current and temperature limiter Y operates current sensitiv. Temperature detection is realized by bimetal disk which was first dimensioned in accordance with the required cut-off temperature. When this fixed cut-off temperature TA is reached, this bimetal disk will snap , breaking a contact system and thereby interrupting the electric circuit of the device to be protected.

Current sensitivity
In the case of an obvious current increase (blocking current or short-circuit current) a resistor, lying in series with the contact system inside the limiter, heats the bimetal disk to its cut-off temperature TA very quickly. When this cut-off temperature TA is reached, the bimetal disk will snaps suddenly and breaks the contacts of the switch. To get an optimal adjustment in accordance to the application there are wide range of resistor values are available.

Self-holding function
By means of a resistor heat is generated by the supply voltage applied after breaking the contact. This heat prevents any decrease in temperature below the value necessary for the cut-in temperature TE. In this was, the switch will keep its contact open, irrespective of its ambient temperature. Cut-in of the switch, and thus closing the circuit, will be possible only after disconnection from the supply voltage.

規格尺寸

技術參數

nom. breaking capacity:	250 V; 2,5 (1,0) A / 60 Hz
min. current:	5 V / 20 mA
max. breaking capacity:	2,5 A cos Φ 1,00 / 250 V, 150°C, 3000 cycles 3,0 A cos Φ 0,45 / 230 V, 135°C, 3000 cycles 4,0 A cos Φ 0,45 / 230 V, 135°C, 2000 cycles 6,5 A cos Φ 1,00 / 120 V, 120°C, 100 cycles max. current value in reference to tripping resitor value (table-sheet: trip current/resistor value)
switching temperature:	40°C – 120°C (150°C), ±5 K
max. ambient temperature:	160°C
type of action:	1.C (3000 cycles) 2.C (max. drift ±5 K)
holding resistor:	0,1 kΩ– 60 kΩ, take note of safety instruction*
trigger resistor:	0,05Ω – 400Ω
approvals:	VDE (EN 60730), UL, (2111) conform to RoHS

德國勒密拖 Limitor GmbH 品牌介紹

Limitor GmbH 是一家定時開關、溫度傳感器、溫度保險絲、溫度開關、溫度限制器、絕緣套管、限流器的德國制造商，始于1979年。勒密拖 Limitor GmbH的高溫、超高溫領域的溫度開關熱保護產品處于水平。

關鍵詞：溫度傳感器絕緣套管