冷熱沖擊試驗機，用來測試材料結構或復合材料，在瞬間下經*溫及極低溫的連續環境下所能忍受
的程度，藉以在最短時間內試驗其熱脹冷縮所引起的化學變化或物理傷害。適用的對象包括理電池、
金屬、塑料、橡膠、電子”二等材料，可作為其產品改進的依據或參考。
Cold & thermal impact tester is used to test the capability of material structure or composite materials to withstand
the continuous environmental changes between extremely high temperature and low temperatures during a short
period, and therefore understａnd the chemical changes or physical damages caused by expansion from heat and
contraction from cold in the shortest possible time. It is applicable to Lithium-ion battery,metals, plastic, rubber,
electronics amongst other， Lithium-ion battery. The test result can be used as a reference or basis for product
improvement.
特點Features
.三箱設備區分為:高溫區、低溫區、測試區三部分，測試產品置于測試區，沖擊時高溫區的溫度沖壓入測試去進行沖擊，測試產品為靜態式。
.采用觸控式圖控澡作介面。操作筒易。
.沖擊方式應用風路切換方式將溫度導入測試區，做冷熱沖擊洲試。
.高溫沖擊或低濕沖擊時，時間可達999H,循環周期可達9999次。
.系統可作自動循環衙移或手動選擇性沖擊并可設定二區或三區沖擊及冷沖熱沖啟始。
.冷卻采二元冷凍系統，降濕效果快速，冷卻方式為水冷式。
.可以試驗沖擊常溫
Divided into three areas:high temperature,low temperature, the three-part test area, testing products placed on the
test,when the impact of high temperature or cold temperatures into the area of impact testing area
Using touch-control graph control as operation interface, easy to operate.
Applying wind route conversion to the shock method to distribute temperature to the testing zone for cold and thermal
shock measurement.
For high temperature shock or low temperature shock,ma x i mum time is up to 999H,ａnd maximum circulation cycles
are 9999 times.
The system can be used fo r automatic Circulation Shock or manual selective shock, capable of setting two zones or
three zones shocks as well as cold and thermal shock start-up.
Binary cooling system is adopted for cooling,with quick cooling effect.The method is water cooling.
Normal temperature shocd test is allowed.
技術參數
型號Model | RL-I-42(A-C) | RL-I-80(A-C) | RL-I-100(A-C) | RL-I-150(A-C) | RL-I-252(A-C) | RL-l-450(A-C) |
內部尺寸WxHxD(cm) | 40x35x40 | 50x40x40 | 50x45x45 | 60x50x50 | 70x60x60 | 80x75x75 |
外部尺寸WxHxD(cm) | 140x185x145 | 150x193x153 | 150x195x160 | 160x220x185 | 175x212x197 | 190x227x221 |
溫度范圍 Temperature Range | (150t-A:-45C;B:-55 C;C: 65t);(高溫區High temperature zone :+60℃一+1500:低溫區Low temperature zone:-10C--65C) |
升溫時間（蓄熱區） TeatingTime (regenerative) | RT-200℃約需(about)35min |
降溫時間(蓄冷區) Cooling Time (storage) | RT--70℃約需(about)55min |
溫度回復時間/轉換時間 Temperature Response Time Change | _5min /<5sec |
溫度控制摘度/分布精度 | 土0.5C/12.5%C |
內外部材質 | 外箱為SUS304#不銹鋼表面條紋處理，內箱SUS 304#為不銹鋼 The external box is the SUS304# stainless steel surface strips，the inner box is SUS304# stainless steel. |
保溫材質 | 耐高溫高密度硅酸鋁纖維棉或PU發泡膠絕緣體材料 Heat-resistance high-density aluminum silicate fiber cotton or PU foam insulator materials |
系統 | P.I.D+S.S.R+微電腦平衡調溫控制系統 P.I.D+S.S.R+Micro-computer balanced temperature control system |
冷卻系統 | 半密閉式雙段壓縮機(水冷式)/全密閉式雙段壓縮機(風冷式) Saemrnermeuc aouoie-stage compressor twater-cooiea type) irmermeuc aouoie-stage compressor Lair-cooiea type, |
保護裝置 | 無熔絲開關、壓縮機高低壓保護開關、冷媒高壓保護開關、故障警告系統、電子警報器 Non-fuse breaker high and low. Pressure protective switch of the compressor, refrigerator high-pressure protective switch, failure warning system,electronic alarm |
配件 | 觀窗口（特殊選購型）、上下可調隔層兩片、通電測線孔、腳輪、水平支架 Viewing window (special order),shelves(freely adjustable,2pcs),power-on test cable port,castor,horizontal support |
壓縮機 | 法國“泰康”牌France's "Tecumseh" Brand |
電源 | AC380V 50HZ/6HZ3 |
控制器 | 韓國”TEMl”Korea “TEMl” 或日本”OYO”牌Japan ‘s “OYO” Brand任選Optional |
重量 | 700Kg | 900Kg | 1100Kg | 1200Kg | 1400Kg | 1900Kg |
|
壓縮機 | 法國“泰康”牌France/s “Tecumseh” Brａnd 德國比澤爾Germanys |
