當前位置：蘭州海蘭德泵業有限公司>>>>DR磁力驅動導熱油泵 DR Magnetic Driven Heat Transfer Oil Pump

DR磁力驅動導熱油泵 DR Magnetic Driven Heat Transfer Oil Pump

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質生產商

所在地

在線詢價 收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2023-02-19 09:02:22瀏覽次數：664次

聯系我時，請告知來自環保在線

產品分類 品牌分類

暫無信息

蘭州海蘭德泵業有限公司

經營模式：生產廠家

商鋪產品：30條

所在地區：

詢價 給他留言

產品簡介

DR磁力驅動導熱油泵DRMagneticDrivenHeatTransferOilPumpDR磁力驅動導熱油泵DRMagneticDrivenHeatTransferOilPumpDR型系列泵

詳細介紹

DR磁力驅動導熱油泵 DR Magnetic Driven Heat Transfer Oil Pump

DR磁力驅動導熱油泵
DR Magnetic Driven Heat Transfer Oil Pump

DR型系列泵，專用于高溫?zé)嵊图訜釄龊匣蝾愃频臒崦江h(huán)境，選用具有較高的磁能積和極低的溫度系數，溫度穩定性和化學穩定性高的磁性材料，可輸送溫度至400℃的熱傳送流體，是一種理想的高溫?zé)嵊脱h(huán)泵。該產品也可用于輸送低溫流體，應用于恒低溫場合。
DR series pumps are specially designed for applications with high temperature hot oil heating or similar thermal media environment; they are made with magnetic materials with high magnetic energy product and extremely low temperature coefficient, and high temperature and chemical stability, to transfer heat transfer fluid with temperature up to 400℃, hence an ideal high temperature heat transfer oil circulating pump.
The product can also be used to transfer low temperature fluid, in applications of constant low temperature and conveying fluid likely to crystallize.

1.單級單吸離心式結構。
2.安裝支撐面在泵軸心線的水平面上。
3.的內部循環和冷卻散熱系統，保證了內置滑動軸承和磁傳動部件的使用壽命。
4.根據熱媒體溫度，必要時對內部循環液和泵支架等進行冷卻，冷卻液量每只管路0.3～0.7m3/h，壓力0.2～0.3MPa。
5.當采用外部循環液時，壓力應高于泵腔內的壓力0.07～0.1MPa，如果輸送易汽化介質時，應高于汽化壓力0.175～0.2MPa。

1.Single-stage single suction centrifugal structure.
2.The mounting support surface is on the horizontal plane of the pump axial centerline.
3.Unique internal circulation and cooling and heat dissipating system, ensuring the service life of built-in sliding bearings and magnetic driving components.
4.The internal circulating liquid and pump supports are cooled when necessary according to the temperature of hot media, with cooling liquid flow of 0.3~0.7m3/h per pipe, at a pressure of 0.2~0.3MPa.
5.When external circulating liquid is used, the pressure should be 0.07~0.1MPa higher than that within the pump cavity, or 0.175~0.2MPa higher than the vaporizing pressure if media likely to vaporize is conveyed.

性能范圍 The main specifications

流量Flow          1.6～400m3/h
揚程 Head               20～125m
介質溫度 Temperature   -45℃～+450℃
進口直徑Import diameter 25～200mm
工作壓力 The max working pressure 1.6MPa

型號意義 Type denotation