當前位置：天津特魯斯科技有限公司>>量儀>>平直度測量儀>>TL741垂直度測量儀線面垂直度測量儀機床垂直度測量儀

TL741垂直度測量儀線面垂直度測量儀機床垂直度測量儀

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號TL-741

品牌

廠商性質其他

所在地

在線詢價收藏產品查看聯系電話

聯系方式：唐經理查看聯系方式

更新時間：2023-07-06 17:41:59瀏覽次數：172次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  量儀

其他量儀

氣動量儀

三坐標測量機

激光測長儀

圓度儀

激光表面檢測設備

影像儀

平直度測量儀

輪廓儀

激光徑直儀

全部產品列表

暫無信息

天津特魯斯科技有限公司

經營模式：其他

商鋪產品：1262條

所在地區：

聯系人：唐經理

詢價 給他留言

產品簡介

TL-741超精密線面垂直度測量儀　　天津特魯斯科技有限公司代理銷售美國的線面垂直度測量儀,測量準確快速,減少設備故障,提高運行效率!　　　　1、概述：　　TL-741超精密線面垂直度測量儀（激光幾何精度檢測系統）TL-740的基礎上增加了一個垂直光束，它能夠檢測各種設備或部件的垂直度、平面度和直線度

詳細介紹

　　TL-741超精密線面垂直度測量儀

　　天津特魯斯科技有限公司代理銷售美國的線面垂直度測量儀,測量準確快速,減少設備故障,提高運行效率!

　　1、概述：

　　 TL-741超精密線面垂直度測量儀（激光幾何精度檢測系統）TL-740的基礎上增加了一個垂直光束，它能夠檢測各種設備或部件的垂直度、平面度和直線度。TL-741超精密線面垂直度測量儀是用于加工中心對設備進行檢測的理想儀器。連續旋轉的轉激光平面360o度掃描時平面精度為0.5角秒（0.002mm/M），90o掃描的精度為0.25角秒（0.001mm/M）。激光面與垂直光束的垂直精度為1角秒（0.005mm/M）?；溆懈┭鼋?、滾動角調節旋鈕和發光水準儀，水準儀精度為1角秒。激光器工作半徑為30.5m。 TL-741激光垂直度檢測儀測量儀（激光幾何精度檢測系統）TL-740的基礎上增加了一個垂直光束， TL-741超精密線面垂直度測量儀能夠檢測各種設備或部件的垂直度、平面度和直線度。它是用于加工中心對設備進行檢測的理想儀器。

2、應用領域：

　　普通水平機兩個機械軸的垂直度檢測機床或組裝管道的垂直度檢測各種表面（方形、框架型、軌道形、法蘭型、圓形等）平面度的檢測機床、導軌、大型軸承平面等的測量和水平調整航空設備的水平度測量和地板校準 成型機的檢測天線陣列的測量加工中心（HBM、VBM、VTL、VMC、HMC、磨床等）大型車床

　　3、功能：各種設備及工件的垂直度、平面度、水平度和直線度檢測。4、特點：連續旋轉的轉激光平面360o度掃描時平面精度為0.5角秒（0.002mm/M），90o掃描的精度為0.25角秒（0.001mm/M）。激光面與垂直光束的垂直精度為1角秒（0.005mm/M）。基座配有俯仰角、滾動角調節旋鈕和發光水準儀，水準儀精度為1角秒。激光器工作半徑為30.5m。 TL-741激光垂直度檢測儀測量儀的系統安裝調整時間大約為10分鐘。用于對機床平面度和垂直度誤差進行測量和修正。配套高精度單軸無線探測靶 A-1519，探測范圍為24.5 mm，分辨率為0.0005 mm。超高精度單軸無線探測靶A-1520，探測范圍為10mm，分辨率為0.00025 mm。標配水準儀的精度為2角秒（0.01 mm/M），使用高精度分裂棱鏡時，精度可達到1角秒。探測靶具有動態數據顯示功能。配套軟件適用于微軟Windows95/98/XP系統，可以快速對數據進行采集和分析。使用交流電源適配器或電池供電。系統主要有激光自動掃描平面發射器L-741、無線探測靶、顯示器和附件組成 5、技術參數：重量激光器：3.1 kg基座：4.54kg材質激光器：鋁和不銹鋼激光類型可見二極管激光，波長670nm，光束直徑4.06mm激光功耗＜0.9mW光束穩定性位移：0.005mm/小時/oC角度：0.36角秒/小時/oC光束直線度空氣噪聲中0.001mm/M±0.0003mm激光面平面度180°/360°掃描時：0.025 mm/M +/- 0.0025 mm90°掃描時：0.001 mm/M +/- 0.0013 mm激光面垂直度1角秒（0.0025mm/M）工作范圍半徑30.5m工作模式單光束或掃描平面電源9V直流外部盒裝電源（2節電池）或115V交流電源適配器水準儀2個發光水準儀，精度為2角秒（0.01mm/M）使用分裂棱鏡可達到1角秒（0.005 mm/M）基座角度調整范圍粗調：+/- 1.5o細調：+/- 0.15o基座調整分辨率粗調：1.7角秒（0.25 mm/30M）細調：0.17角秒（0.025 mm/30M） Entry-Level Laser Alignment System for Leveling and Squaring MachineryThe TL-741 Ultra-Precision Levelscan®leveling and squaring laser is part of a line of more affordable, yet highly versatile and accurate machine alignment systems designed to quickly measure and correct machine geometry errors with minimal setup. An entry-level laser alignment system, the L-741 quickly finds and fixes flatness and squareness / plumb errors of most high-accuracy machine tools and other alignment applications.Unsurpassed Plane FlatnessOne of the critical components of any laser alignment system is the straightness or surface flatness of the laser beam or plane, as this is the reference from which the measurements are made.The TL-741 features the flattest laser plane in the world. Its continuously rotating laser plane is flat to 1/2 an arc second (0.00003"/ft or 0.002 mm/M) in a 360osweep and 1/4 arcsec in a 90osweep (0.000015"/ft or 0.001 mm/M).100' Squareness Measuring CapabilityIt also features a plumb laser that is square to the laser plane to within 1 arc second (0.00006"/ft or 0.005 mm /M). This plumb laser can be projected out 100' (30.5 M), allowing squareness of even the tallest machine in the world to be easily checked. The TL-741 laser alignment system also features 2 built-in level vials that are accurate to 1 arc second.New Line of Wireless TargetsAnother critical component of laser alignment systems is the resolution of the targets. This determines how close the measurements can be made.The TL-741 laser alignment system utilizes our new line of wireless targets (A-1519, A-1519HR and A-1520) that feature up to 0.00002" (0.0005 mm) resolution, large measuring ranges of up to 1" (25 mm) and an IR transmitter for wireless communication with our R-1309 Cassiopeia Readout, which can simultaneously display up to 4 targets.These targets are all powered by rechargeable batteries, are lightweight and can be used as digital height gages when used with precision inserts. And like all Ham laser alignment systems, the targets provide live alignment data so misalignment errors can be fixed without changing the setup! ApplicationsFor applications with tolerances of 0.00002"/ft or 0.0017 mm/M or higher, the TL-741's applications include:·Checking the flatness of almost any surface (squares, frames, ways, flanges, circles, etc.)·Measuring and leveling machine beds and ways, large bearing surfaces, and fabrications·Checking the squareness of any vertical machine axis or surface to a horizontal axis or surface·Checking plumb of an vertical surface up to 100 feet (30.5 meters)·Checking way twist and parallelism between horizontal surfaces·Measuring surfaces up to 200 feet (61 meters) long with 1 setup·Collecting data for and analyze lines of motion using our Machine Tool Geometry or Plane5 Software.Geometry Analysis SoftwareFor wireless recording and analyzing laser alignment system data, our color, 3-D surface flatness and squareness analysis software, Plane5, simplifies and streamlines the data analysis process. It can measure up to 7 different surfaces in one project setup file and present a color, 3-D graph of the flatness and squareness analysis for each surface. 的產品和服務,值得信賴!

.jpg