當前位置：賽默飛世爾科技（中國）有限公司>>混合器>>擠出機>>HAAKE™ Rheomex OS Twin Screw Extruder for HAAKE™ PolyLab™ OS Torque Rheometer

HAAKE™ Rheomex OS Twin Screw Extruder for HAAKE™ PolyLab™ OS Torque Rheometer

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號Thermo Scientific

品牌

廠商性質其他

所在地

在線詢價 收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2024-02-01 12:42:20瀏覽次數：214次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  混合器

獨立式混合系統

渦旋混合器

擠出機

全部產品列表

暫無信息

賽默飛世爾科技（中國）有限公司

經營模式：其他

商鋪產品：2514條

所在地區：

詢價 給他留言

產品簡介

HAAKE Rheomex OS Twin-Screw Extruder for the HAAKE PolyLab OS Torque Rheometer System is available either as a parallel twin-screw extruder or a conical twin-screw extruder and attaches via a plug-and......

詳細介紹

The HAAKE Rheomex CTW 100 OS is a conical counter-rotating Twin-Screw Extruder that can be used for a wide range of tasks in laboratories and pilot plants when used together with specially designed screws with differing geometries. The conical twin-screw extruder is used for high-shear compounding of materials such as PVC, wood fiber compounding, and blending of polymers with different viscosities. A wide range of applications can be performed using different designed screw to adapt to the needs of the laboratory or pilot plant. The counter-rotating design supplies a positive material displacement from the hopper to the die, delivering high levels of pressure and shear, while allowing control of residence times.

The HAAKE Rheomex PTW 16 or 24 parallel twin-screw extruders have screw diameter of 16 mm or 24 mm, respectively. The horizontally split barrel, with the top half fitting upward, allows easy inspection of the melting and mixing. Parallel twin-screw, small-scale compounder are used for instance for running early-stage compounding and blending tests. For optimization of this behavior, the screws can be configured individually with elements for conveying, mixing and kneading. The segmented top barrel half is constructed in easy to configure modules for feeding and venting.

Continuous compounding with twin-screw extruders
Twin-screw laboratory extruders have a proven record in continuous compounding with feed-dosing of different additives (liquids or solids) along the extruder barrel
Combination of a twin-screw extruder unit with additional sensors offers the ability to measure material properties of the melt during processing

Typical twin-screw investigations:

Compounding of polymers with additives, reinforcing fibers, and fillers
Viscosity and flow behavior of the compound
Extrudability and scale-up data
Reactive extrusion
Morphology of polymer and nanocomposites
Decomposition of biopolymers
Influence on screw design on the viscosity

Compatible with:

Peripheral devices such as feeding systems, application-specific screws, mixer rotors, or extruder downstream equipment combine different modules to a complete downsized production line for the testing or small-scale production of new materials: