污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
山東威蘭圖新能源科技有限公司
會員1.png)
山東威蘭圖新能源科技有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地
聯系方式：寧經理查看聯系方式
更新時間：2023-03-21 16:21:05瀏覽次數：402次
聯系我時，請告知來自 環保在線性能特點：Performancecharacteristcs：1、優質鍛件井經固融處理的閥體
性能特點： Performance characteristcs：
1、優質鍛件井經固融處理的閥體，確保無內外裂敏
2、閥座堆焊鈷基硬質合金，極大地提高了高溫硬度和抗介質沖蝕能力
3、閱果用鉆鉻鎢鋼球，具有很高的高溫硬度，使其抗介質中蝕能力大大憂于通針型，
4、經鍛造的閥桿，柔性和強度一同一般，滾壓加工的螺紋位于填料之上，溫免了與介質接，光桿部位經精處理
不僅與填料緊密接觸，保證了密封無外溫，而且液少了開啟力矩，閥門啟閉時靈活自如。
5、設計的中口金屬密封墊，經特殊工藝調質處理，確保高溫高壓下的良好密對
6、致密性優良的柔性石墨填料，確保了高溫高壓下無外溫
7、執行標準：ASM1B16．34
1. The valve body has quality forging and after melts processing (rmly. This can guarantee that does not have the inside and outs
de cracks
2. The valve seat built-up welding cobalt base hard alloy, this can enhance the high temperature degree of hardness and anti-med
ium eroding ability enormously.
3. The valve petal uses the cobalt chrome tungsten steel ball. It has the very high high temperature degree of hardness. This can
cause its an-medium eroding ability to surpass the ordinary needle valve
4. The va e stem is forged, its flexibility and intensity different general. The trundle processed thread located at padding above.
this can avoid contact with the medium, The polished rod spot is processed by correct gridding. This can guarantee the close con
tact with the padding. The valve has no outside leaks. This design can also reduce the opening moment of force and the valve op
ens shuts time nimble freely
5. The unique design mouth metal gasket is manufactured by special craft quenching treatment. This can guarantee the good se
al in the high temperature and high pressure.
6. The compact fine flexible graphite padding, has guaranteed the valve has not outside leaks in the high temperature high press
ure
7. Standard: ASMI B16. 34
剖視圖
技術指標：
介質溫度：200C－650℃
公稱壓力：2．5Mpa－25Ma
ipa
工作壓力：2．5Ma－16M
適用介質：適用于油品、水和腐蝕介質
Technical indicators
O edium temperature: 200C-650'C
e Nominal pressure: 2. 5mpa-25mpa
O Working pressure: 2. 5mpa-16mpa
O Applicable medium: oil, water, corrosive medium
尺寸表
通經 | 結構長度A | 中心高B | 手柄長度C | 重量KG |
DN6/1/4’’ | 56 | 84 | 60 | 0.36 |
DN10/3/8’’ | 62 | 86 | 70 | 1.2 |
DN15/1/2’’ | 86 | 123 | 80 | 1.4 |
DN20/3/4/’’ | 86 | 123 | 95 | 1.3 |
DN25/1’’ | 86 | 123 | 95 | 1.3 |
材質表
部件/類別 | 321 | 316 | 316L |
閥體 | 321 | 316 | 316L |
閥座 | 司太立 | 司太立 | 司太立 |
閥桿 | 321 | 316 | 316L |
閥瓣 | Co-Cr-W鋼球Co-Cr-W Steel ball | Co-Cr-W鋼球Co-Cr-W Steel ball | Co-Cr-W鋼球Co-Cr-W Steel ball |
填料 | 柔性石墨 | 柔性石墨 | 柔性石墨 |
溫壓曲線圖
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
