| 循環式電加熱器是通過強迫對流的方式對流動介質進行加熱的，它是把浸入式電加熱器裝入壓力容器內組成的。工作時，用泵把流動介質泵進加熱腔，進行加熱。加熱后的介質在加熱器另一端流出，它是通過泵強制循環的一種加熱方式。
The circulation type electric heater heats up the fluid in the forced convection mode.That is,the fluid is pumped into the heating chamber at one end of the heater,where it is heated,and flows out of the heater at the other end. That is a heating mode by forced. 
特點：
Characteristics: - 體積小，功率大，循環式加熱器內部主要采用浸入式加熱器，zui大功率達1MW。
Compact size,big power,Circulation heater has immersion heater inside,Max power can be 1 MW. - 加熱速度快，控溫精度高，熱效率高。
Fast heating, high precision of tempt control and high thermal efficiency. - 應用范圍寬，適應性強：循環式加熱器可用于防爆或普通場合，它的防爆等級可達B級和C級，它的耐壓可達20MPa 。
Wide range of application, high adaptability. Circulation type heater can be used either in normal situation or in anti explosive situation. Its protection of explosion grade can reach B or C and its pressure endurance reaches 20 MPa . - 加熱溫度高：循環式加熱器設計zui高工作溫度可達650℃。
High heating temperature:circulation type heater is designed to have max empt of 650℃ . - 全自動化控制：通過循環式加熱器控制系統設計，可方便實現出口溫度、壓力、流量等參數自動控制，并可與計算機聯網，實現人機對話。
Fully automatic control:by means of control system designing for the circulation heater it is easy to effect auto control of parameters like outlet tempt,pressure,and flow rate and connect it to computer network for man/machine conversation. - 壽命長，可靠性高：循環式加熱器不同用途設計相應功率負荷，并采用多重保護，使得本加熱器安全性和壽命大大增加。 Long working life,high reliability: circulation heater is designed to have its power load correspond to different applications and has multiple-fold protection,so that safety and working life of the heater is greatly enhanced.
典型應用場合：
Typical applications area: - 各種水加熱，包括民用盥洗室里的水加熱及工業上工藝水的加熱。
Various kinds of water heating includeing bathroom water heating civilian life and process water heating for industrial purposes. - 碳?xì)浠衔锏募訜?/strong>，包括導熱油、燃料油、瀝青、石臘等等。
The heating of hydrocarbon including heat conducting oil,fuel oil,tar,and paraffin. - 清洗機、融冰槽的加熱，包括NaOH溶液及各種洗滌劑。
Heating of cleaning machine and ice melting trough,including NaOH solution and all kinds of detergent. - 空氣的加熱，適用于一定壓力下，一些粉末干燥、化工過程及噴射干燥。
Heating of air,suited to drying up certain powder,chemical engineering process and jet drying under certain pressure. - 蒸氣的加熱。
Heating of steam. - 氣體加熱，包括H2，N2及其他氣體。 Heating of gases,including H2,N2 and various kinds of inert gases.
型號定義：
The Type signifies: 
注：
循環式加熱器規格選型可見本公司樣冊。當然，循環式加熱器的規格選型不是*的，例如根據某一額定功率和功率高密度來選擇加熱器，你可以選擇法蘭大一點，長度短一點，也可以選擇法蘭小一點，長度長一點，具體的選擇要根據客戶的具體情況而定，我公司技術部隨時為您服務。 Select the type according to our product handbook.Naturally,the selection of circulation heater specifications is not the only one.To select heater according to nominal power and power density,you may selec one with bigger flange and smaller length,or smaller flange with bigger length.Selection will have to depend on the actuality of user's situation.In any case you may be sure of the assistance from our tech dept. 加熱器防爆型為“XHEx”，采用不銹鋼材料或碳鋼，若加熱溫度較高時，則法蘭與接線盒之間需加一個散熱區。散熱區的長度隨加熱溫度高低而定，具體設計請洽本公司技術部。
Note: The anti explosive type in XH heater series is "XHEx" and it is made of stainless steel or carbon steel.If heating tempt is the range of 100℃-200℃,a heat diffusion sector of 100 will have to be added between flange and terminal connection box,whose dimension shall be A+ 100.If heating tempt is higher the heat diffusion sector will have to be longer.Insulation material and thickness will depend on the user's media tempt and user requirement. For specifics of the design please consult our technical dept. |
環保在線